Customized Armature Aluminum Liquid Die Casting Machine Highly
This armature die casting machine is consisted of main machine and
hydraulic electronic control system .
1.Main cylinder mould locking system
2. injection system
3. residual aluminum(sprue)pushing and conveying mechanism
4. automatic demould oil spraying
5.lower mould cooling system
6. lubricating system of puncher pin and molten aluminum container
7.Lower mould rotation system
8. Mould assembly system
9.Hydraulic system and electronic control system
10. Aluminum liquid loading system
12. Loading system
Armature die casting machine main function and characteristic
Automatic get aluminium melt liquid, automatic loading and
unloading the rotor.
Rotor loading: automatic pneumatic circularly pick up.
Get aluminium melting liquid: servo motor control the mechanical
arm, control the liquid volume through human-machine interface.
Automatic cut the waste material, automatic recycle the cut wasted
material and convey it to the furnace by the conveyor.
Automatic feed mold releasing agent, the feeding time and times can
There is water cooling channel, helpful for reducing the mold
Setting on touch screen: forward and backward speed, stroke, swing
angle of the mechanical arm, loading speed,etc.
Machine will alarm and stop working if out of material.
Failure will be automatic displayed and machine will alarm.
One person can take care of more than one machine.
Adavantages of our armature die casting machine:
a. labor cost saving, only one operator required, the alumium scrap
b. safe, it is very easy for operator to run the machine, operator
only need to press "start" button, no need to handling the heavy
tooling which might occur body injury, and the machine has
aluminium anti spatter design to prevent the aluminium liquid from
spraying and cause injury.
c. Healthy, our machine doesn't need asbestine cup to keep the
temperature and demould
d. Power saving, and tooling cost is much less and fast tooling
|1||main cylinder mold lock force||KN||630|
|2||main cylinder mold lock travel||mm||400|
|1||Injecting cyliner travel||mm||150|
|2||Injecting cylinder injecting force||KN||400|
|5||aluminum depot OD(Max)||mm||100|
|6||punching head OD(Max)||mm||100|
|7||aluminum depot capacity(Max)||KG||2|
|8||Injection punching head travel distance||mm||60|
|11||Rotor stack height||mm||MAX100|
|3,Motor and pump:|
|1||Pump motor power||KW||7.5+7.5|
|2||Divider motor powder||KW||1.5|
|3||Oil pump (plunger pump)||L||40Y+40Y|
|2||assembly of oil tank and electric appliance(L*W*G)||mm|
|5,Cooling pump specification:|
|1||Submersible pump power||KW||1.5|
|2||Submersible pump rate of flow||M3/H||5|
|3||Submersible pump water pressure||MPa||0.4|
Remark: the max pressure of this machine is 25Mpa
Submersible pump power : 220/380V Optional
Click below picutre to view the vidio.