Auto Four Working Station Armature Casting Machine For Aluminum
Rotor Die Casting
Our automatic rotor die casting machine has four working stations
and it is also equipped with mechanical arm. Therefore, one person
can take care of more than one machine.
It is better than the conventional die-casting machine for below reasons.
1. safe:it adpots a C type structure. During production, there’s no
need for operator to work under the projection area. Meanwhile,
operator does not need to handling the heavy tooling which might
occur body injury, and the machine has aluminium anti spatter
design to prevent the aluminium liquid from spraying and cause
2. environmental protection :Unlike the conventional die casting
machine, our machine doesn't need asbestine cup to keep the
temperature and demould. The adpotion of automatic solid
lubricating system and demould oil adding system makes the whole
production smokeless , tasteless , pollution free and clean.
3. Power saving :the whole power of our machine is 7.5KW. During
die casting, machine will transfer the residual aluminum to the
smelter in time. Since the residual aluminum still has a high
temperature. It is cost saving and time saving. Besides, the
injection system of our machine is patented. The injection head can
be used for about 1-2 months, while the injection cylinder for more
than half year. Since the injection head and cylinder are easy
consumed parts, therefore, our design also reduce the changeover
frequency and cost of production.
4. High efficiency: 10-12s/pcs, 300-400pcs/hour
5. easy operation: The conventional machine requires about 3-5
operators for one machine. However, for our machine, one people can
take care of more than one machines. It only takes one day for
green hands becoming practician. It greatly reduced labor cost.
6. fast mould changeover : it takes about 10min to change mould.
Meanwhile, the cost of mould is much less and the production is
This kind of Aluminium Rotor Die-casting Machine is used for
producing cast-aluminum rotor.
Variety of application, easy operation.
We directly supply our machines to many countries, like USA,
France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.
We could customize machine for our customer as per their
We have Overseas Service Center.
|1||main cylinder mold lock force||KN||400|
|2||main cylinder mold lock travel||mm||200|
|1||Injecting cyliner travel||mm||150|
|2||Injecting cylinder injecting force||KN||200|
|5||aluminum depot OD(Max)||mm||65-75|
|6||punching head OD(Max)||mm||65-75|
|7||aluminum depot capacity(Max)||kg||0.5|
|8||Injection punching head travel distance||mm||50|
|10||Rotor OD||mm||Max 75|
|11||Rotor stack height||mm||Max 70|
|3,Motor and pump:|
|1||Pump motor power||KW||7.5|
|2||Divider motor powder||KW||0.2|
|3||Oil pump (plunger pump)||L||40Y|
|2||assembly of oil tank and electric appliance(L*W*G)||mm|
|5,Cooling pump specification:|
|1||Submersible pump power||KW||1.1|
|2||Submersible pump rate of flow||M3/H||3.5|
|3||Submersible pump water pressure||MPa||0.4|
|Remark: the max pressure of this machine is 25Mpa / Submersible
pump power 220/380V Optional|
Rotor casted by this machine
Click below picutre to view the vidio.