AUTOMTIC POSITION ARMATURE DYNAMIC BALANCING MACHINE ADDING WEIGHT
The Automatic Positioning Armature Dynamic Balancing Machine can find and stop at unbalanced position automatically. No need to
mark on armature (such as reflective sheet, black mark and so on).
1. Put armature in machine manually
2. Carry out armature's imbalance testing automatically (can start
by manual),display and maintain testing data automatically, at the
same time,it can display angular difference of left and right
imbalance point, simple and easy operation, furthest to avoid
faults during operation.
3. Stop at adding weight point (left) automatically, finish adding
manually, change to the next adding weight point(right), finish
adding manually, test again, and complete balancing adjustment.
4. Take out well-balanced armature, put in unbalanced one.
1. No need to mark on the armature (such as reflective sheet, black
mark an so on)
2. Imbalance point positioning automatically
3. Easy operation.
4. Reduce the complexity of the machine operation
1. Professional testing machine box
2. High sensitivity hard support measure frame
Machine's range of application:
Armature dynamic balancing (refer to below machine's technical
Machine's efficiency of operations:
1. Relate to the initial imbalance volume the balancing volume of
2. Cycle of measurement is 6s/piece; usually measure 2-3 times.
Machine's technical parameter:
|Armature lamination length||10~200mm|
|Armature diameter range||Max 200mm|
Spare parts list along with the machine:
1. Belt 2pcs
2. Internal hexagonal wrench 1set
3. Slot type screwdriver1pc
4. Philip's type screwdriver1pc
5. 6A fuse 2pcs
6. 2A fuse 2pcs
7. Tooling box 1pc
8. Support chip 8pcs
9. Operation instruction 1pc
The armtaure balancing machine working picture