Full - Automatic Stator Coil Forming Machine Hydraulic System
1. This coil forming machine is used for stator coil final forming,
2.The forming process is done by machine automatically
3. it is driven by the hydraulic system
4. It is controlled by the PLC.
5. This forming machine is of highly efficiency and qualified forming.
Displacement of cylinder
Stator Coil Final Forming Machine is used for stator coil final forming, it is driven by the
hydraulic system, controlled by the PLC. Its tooling design adopts
flexible principles of inner expansion. The outer wrapping and edge
forming form the stator winding. It can ensure appropriate winding
outside dimension after lacing. It is of highly efficiency and
qualified forming. High technology, stable performance and
Required information for quotation: stator drawing before forming
and after forming, including stator O.D, stator I.D, stator stack
height, and end coil dimension.
It is of highly efficiency and qualified forming. High technology, stable performance and reasonable price.
Regularly check if there is water in the filter. If yes, discharge
Regularly check if there is sufficient oil in the atomized
lubricator. If not, replenish it.
Regularly check the lubricating condition of guide mechanism,
replenish if necessary.
Check and clean up the electrical cabinet once every three months.
Check solenoid valve screws and pipe connectors once every 3
Check filter once every 2 months.
Stator coil forming machine forming process