Automatically Motor Testing Equipment / Machinery For Refrigerator
, Air Conditioner Stator
1. This machine is used for testing stator.
2. It is applied to integrated test varieties of compressor stator
in refrigerator, air conditioner and heater etc.
3. Each test items could be on or off randomly.
4.The testing data will show on the screen.
5. All the testing data will be saved automatically.
1.Tester Max dimension:850(width)*950(depth)*1870(height),surface
plastic blast, white colorcomputer. Electric cabinet in good
ventilation condition and mouse proof.
2. Two working position could rotary test. The height of working
position is 790mm, working station dimension is 460
3. Computer system with CPU1.3G, internal save capacity 128M,
harddisk 80G,15"colorful display screen
4. Connector and sampling circuit from Japan and U.S.A
5. Windows 2000 operation system
This series of stator testing equipment is applied to integrated
test varieties of compressor stator in refrigerator, air
conditioner and heater etc. Its LCD shows all technical data which
obtained by industrial control computer, which check and verify the
quality of testing stators.
Test item and Techenical Specification:
1.Cooling state resistance test
Four points, with auto correctting ambient temperature function,
the standard temperature can be set, wire connection according to
Test range: 1Ω--200Ω
Test tolerance: ±1%
Pass high voltage between core and winding
Test condition: AC 0-3000V adjustable.
Voltage tolerance: ±3%
current leakage range: 0.1-10mA
Current tolerance: ±1%
Time : 1s~60s(software setting)
3. Insulation Resistance
Test condition: DC 500V
Range : 10MΩ~2000MΩ
Tolerance: 10MΩ~200MΩ ±3%
Above 200 MΩ, the tolerance is negligible
4. Turn to Turn Insulation
Test condition:Taking a qualified stator as the standard sample,
and save its test curve and data in computer. Then comparing the
values of standard one and the to-be-tested stator, calculating the
area and the relative error value of frequency, and then figure out
the upper limit value of relative error value.
Pulse voltage peak value: 500V-3000V
Pulse peak value tolerance : ±5%
Criterion value setting:conclude as per the percentage of
S and f, setting range is: 1%-99%
5. Polarity test
Test condition: Electrify the motor stator DC current, judge the
polarity direction of the stator by Hall element. Criterion value setting: Alert when the direction of polarity is
different from the setting.